288 LED ProSeries Ultra Bright Motorcycle Accent Light Kit with Remote Control
This kit comes with 288 of our brightest LEDs. We highly recommend this kit for a cruiser with saddle bags. It comes complete with remote controls, engine kit, road coverage kit for great motorcycle underglow, front and rear wheel kits, saddle bag kit, and extra strips to make your chrome shine.
Brake Mode is standard on the ProSeries kits. JoeFlorida invented brake mode to help our customers ride safer. When connected, brake mode enables the option for the lights to turn bright red when the brake is applied on the motorcycle. When the brake is released, the lights will go back to doing whatever they were doing prior to the brake being applied.
As always with JoeFlorida kits, it comes with all of the necessary extension wires and everything you need for an easy installation. Each strip comes complete with heat resistant wire and our ProSeries SureFit connectors for easy installation. The front wheel multicolor flexible LED strips include six (6) feet of wire with connectors on the end for simple installation and no visible connectors.
This kit is fully expandable. If you wish to add more LED light strips to this kit, now or later, we make it easy. The strips will come with extension wires and "Y" expansion connector ports to make installation simple. This kit can support over 1000 LEDs.
Check out everything that comes with this kit in our unboxing video:
The JoeFlorida ProSeries Ultra Bright LED light strips are our brightest yet!
J300 ProSeries Controller (Standard)
The LED kit comes with a 300-function remote control that can change ten different colors (Red, Pink, Purple, Blue, Teal, Green, Yellow, White, Warm White, Orange) all of which have options to be run in solid mode, fade mode, flash mode, and transition mode. These modes can also be run at multiple rates. As a bonus, it also comes with two extra multicolor strobing, flashing, and transition modes.
ProSeries J-Link Controller (Optional)
The ProSeries J-Link is a smart phone enabled controller. It allows over a billion color combinations, customizable keyfob operation and easy access handlebar button module (optional), and includes a battery saver that automatically turns off the lights when the battery voltage drops below your setpoint.
Strip Placement Guides - We are in the process of uploading more of these guides. If you do not see your bike, give us a call we can help!
In the Box
Laws governing the use of custom lighting vary from state to state. Some of these lights or some of these colors may not be street-legal in some states, and are offered for off-road or show use only. Please check with your local authorities before purchasing.
Posted by Mike H. on 29th May 2018
I installed the Pro Series 288 Multi-color LED lighting kit less than 2 months ago on my Harley Ultra Limited and am so far very satisfied. The LEDs are very bright. It took me longer than I expected to install the kit but that was in part because I wanted to make sure the LEDS were in the perfect place and in part it takes time to figure out the best wiring extensions and multi-plug splitters to use. I had to assemble and re-assemble some of these a few times. Joe Florida definitely gives you plenty of wiring harness and extension options. I do wish it could be hooked up to an on/off switch on the fairing dash rather than having to use the fob each time. I also wish it gave more instruction on hooking up the brake light mode. Overall though I am happy with the kit.